Showing posts with label cases. Show all posts
Showing posts with label cases. Show all posts

Thursday, March 24, 2011

Carrier Loading Tip - Do the Math and Show Your Work


When it comes to loading, one of the best ways to protect yourself as a driver is to observe the loading of your trailer, for not only for product quality and condition, but also for quantity.

Here are some tips on how to keep track of what is being loaded in your trailer:

- If you are not sure of how many pallets/cases are supposed to be loaded on your trailer, call UWC immediately and we will provide you with this information. Remember, you can always reach us, toll free 24/7: 1.877.273.7400!!

- Carry a small notepad with you, that will help you keep track of the # of pallets/cases that are going on the trailer (this is the do your math part!).

- Compare the Bill of Lading with the UWC load sheet, and with what is actually being loaded on the trailer – any discrepancies - either with product description or count - must be communicated to UWC and written on the BOL (this is the show your work part!). Writing any issues/discrepancies down on the BOL is one of the best ways to protect yourself against any issues that may arise upon delivery.

- If you do not have access to the loading dock, you must write “SHIPPER LOAD AND COUNT” on your BOL. The same goes here for delivery – if there is no access to the receiving dock, record “RECIEVER UNLOAD AND COUNT” – this helps indicate that the work done at these points was by someone other than yourself. These are key!!!

We all know how hard it is to make your case when all you have as proof is your words; documentation is key in this industry!!! These tips will surely help you on your way to successful loading practices; for more, take a look at UWC’s Carrier Loading Guidelines. Do you have any more counting tips or experiences to share?

Thursday, September 2, 2010

Carrier Loading Tip - Load Lock Review

Load locks play one of the most important roles in ensuring the safe and secure transportation of goods. Did you know that all roadways are engineered with a center crown for water run-off? This causes all vehicles on the road to lean slightly to the right. Because of this, reefer and other truck/trailer units must ensure that whenever possible:

  • The rear four pallets of every load should be stacked to the right side of the trailer;

  • The rear four pallets should be side by side tight against each other and tight against the passenger side wall to reduce shifting and tipping of pallets;

  • Two load locks should be placed between the floor and the ceiling on the left side of the rear pallets;

  • Two load locks should also be placed on the back of the rear pallets between the trailer's walls.

  • Remember that whenever possible, a minimum of 6 inches of space between the load and the doors must be maintained in order to allow adequate air flow between the load and the doors.

Improperly positioned freight or freight that is not locked into position to avoid shifting during transit can result in:

  • Cases and/or pallets being tipped and/or crushed. This can result in damages that have the potential to cause a significant loss of value to the load and therefore may have the potential for additional costs.

  • Improper air flow which will most likely reduce a reefer unit's ability to maintain proper running temperature. This has the potential to cause claims against the carrier due to temperature issues.

Prevention, as always, is the best way for carriers to protect themselves from potential claims/additional charges related to shifted/improperly positioned loads!! 3-6 load locks must be used for all UWC loads, and all must be in good working order!!!


It's hard to believe, but Labor Day weekend is upon us!! UWC wishes everyone a happy and safe long weekend!!!