Showing posts with label secure. Show all posts
Showing posts with label secure. Show all posts

Thursday, March 31, 2011

Revisiting..... Load Locks




Back in September, we discussed the topic of load locks. To review, load locks are used to secure cargo, and are telescoping bars that have ratcheting mechanisms inside, and are typically made of steel or aluminum. To set load locks into place, you telescope the bar until the ends contact the wall or the floor and the ceiling, then flip the tension handle to lock it in place.


Today, we will revisit this important topic and provide some tips that will be useful in improving or maintaining your CSA score for the Cargo-Related BASIC. To review, the Cargo-Related BASIC relates to failure to properly prevent shifting loads, spilled or dropped cargo, overloading, and unsafe handling of hazardous materials on a Commercial Motor Vehicle. Example violations are: improper load securement, cargo retention, and hazardous material handling. In refrigerated produce shipments, load locks (along with proper loading techniques) are one of the most important tools to ensure that cargo is loaded and secured properly for transport.


So, now, let’s review how to use load locks to our best advantage:


- Make sure that you have 3-6 load locks that are in good working order available.

- It is recommended that 2 load locks be placed between the floor and the ceiling on the left side of the rear pallets – this is because all vehicles on the road lean slightly to the right due to the road’s center crown, and pallets are therefore stacked slightly to the right of the trailer in order to minimize shifting.

- It is also recommended that 2 load locks be placed on the back of the rear pallets between the trailer’s walls. Remember that it is always advisable to have a minimum of 6 inches of space between the back doors and the load to allow for adequate air flow.

- Even if you don’t use your load locks on a regular basis, a monthly inspection is advised to ensure that they are operating effectively and are not rusted or otherwise broken. Don’t get you and your load locks jammed up at time of loading!


Improperly positioned freight can not only affect your BASIC score in the Cargo-Related area, but can also result in damages have the potential to cause a significant loss of value to the load, and consequently, the potential for additional costs. So, the moral here (once again) is be prepared; prevention is always the best way!


Share your tips for using load locks with us!!!!

Thursday, September 23, 2010

National Truck Driver Appreciation Week!!

The United States is currently celebrating National Truck Driver Appreciation Week! The event is an annual occurrence, and will end this year on September 25th.

The American Trucking Association reports that there are more than 3.4 million professional truck drivers throughout the United States, who drive more than 431 billion miles per year!

UWC recognizes that the dedication and success of our drivers is directly related to our company's success, and we want to take this time to honor all our drivers (Canadian, American, and Mexican!!) for their hard work and commitment in taking on what is undoubtedly one of North America's most demanding and important jobs.

UWC would like to take this time to thank our drivers for their continued commitment that allows us to provide safe, secure, and on time deliveries of the goods we transport!!!

Thursday, September 2, 2010

Carrier Loading Tip - Load Lock Review

Load locks play one of the most important roles in ensuring the safe and secure transportation of goods. Did you know that all roadways are engineered with a center crown for water run-off? This causes all vehicles on the road to lean slightly to the right. Because of this, reefer and other truck/trailer units must ensure that whenever possible:

  • The rear four pallets of every load should be stacked to the right side of the trailer;

  • The rear four pallets should be side by side tight against each other and tight against the passenger side wall to reduce shifting and tipping of pallets;

  • Two load locks should be placed between the floor and the ceiling on the left side of the rear pallets;

  • Two load locks should also be placed on the back of the rear pallets between the trailer's walls.

  • Remember that whenever possible, a minimum of 6 inches of space between the load and the doors must be maintained in order to allow adequate air flow between the load and the doors.

Improperly positioned freight or freight that is not locked into position to avoid shifting during transit can result in:

  • Cases and/or pallets being tipped and/or crushed. This can result in damages that have the potential to cause a significant loss of value to the load and therefore may have the potential for additional costs.

  • Improper air flow which will most likely reduce a reefer unit's ability to maintain proper running temperature. This has the potential to cause claims against the carrier due to temperature issues.

Prevention, as always, is the best way for carriers to protect themselves from potential claims/additional charges related to shifted/improperly positioned loads!! 3-6 load locks must be used for all UWC loads, and all must be in good working order!!!


It's hard to believe, but Labor Day weekend is upon us!! UWC wishes everyone a happy and safe long weekend!!!