Showing posts with label loading. Show all posts
Showing posts with label loading. Show all posts

Thursday, March 31, 2011

Revisiting..... Load Locks




Back in September, we discussed the topic of load locks. To review, load locks are used to secure cargo, and are telescoping bars that have ratcheting mechanisms inside, and are typically made of steel or aluminum. To set load locks into place, you telescope the bar until the ends contact the wall or the floor and the ceiling, then flip the tension handle to lock it in place.


Today, we will revisit this important topic and provide some tips that will be useful in improving or maintaining your CSA score for the Cargo-Related BASIC. To review, the Cargo-Related BASIC relates to failure to properly prevent shifting loads, spilled or dropped cargo, overloading, and unsafe handling of hazardous materials on a Commercial Motor Vehicle. Example violations are: improper load securement, cargo retention, and hazardous material handling. In refrigerated produce shipments, load locks (along with proper loading techniques) are one of the most important tools to ensure that cargo is loaded and secured properly for transport.


So, now, let’s review how to use load locks to our best advantage:


- Make sure that you have 3-6 load locks that are in good working order available.

- It is recommended that 2 load locks be placed between the floor and the ceiling on the left side of the rear pallets – this is because all vehicles on the road lean slightly to the right due to the road’s center crown, and pallets are therefore stacked slightly to the right of the trailer in order to minimize shifting.

- It is also recommended that 2 load locks be placed on the back of the rear pallets between the trailer’s walls. Remember that it is always advisable to have a minimum of 6 inches of space between the back doors and the load to allow for adequate air flow.

- Even if you don’t use your load locks on a regular basis, a monthly inspection is advised to ensure that they are operating effectively and are not rusted or otherwise broken. Don’t get you and your load locks jammed up at time of loading!


Improperly positioned freight can not only affect your BASIC score in the Cargo-Related area, but can also result in damages have the potential to cause a significant loss of value to the load, and consequently, the potential for additional costs. So, the moral here (once again) is be prepared; prevention is always the best way!


Share your tips for using load locks with us!!!!

Thursday, July 15, 2010

Loading Guidelines: Spotlight On.... Pre-Cooling Trailers

Why is pre-cooling so important?
Pre-cooling is one of the most important steps in the pre-loading stage of produce. It is absolutely essential for a refrigerated trailer to be pre-cooled. This becomes especially important during the summer months when temperatures, especially in the southern United States, can reach in the 100s °F. Failing to pre-cool a trailer will result in residual heat in the trailer, walls, ceiling, doors, and floor, which can affect the temperature of the product that is loaded in the trailer, and essentially heat the load.

How it works
Trailers must be pre-cooled to their correct requested product running temperature. It takes up to 1 to 2 hours to pre-cool a trailer with the thermostat pre-set and the doors closed. This is critical to remember as pre-cooling trailers prior to arrival at pickup sheds will result in quicker loading times.

When preparing to pick up a load, the doors of the trailer must not be opened until the loading crews are ready to load it. Also, remember that just before the doors are opened to begin loading, the refrigeration unit must be turned off.

So remember, keep cool to ensure success at loading docks!
Do you have anything to add? Please feel free to share your thoughts and comments!

Thursday, July 8, 2010

Pallet Configuration in Reefer Units

Proper trailer loading and pallet configuration is critical to successful deliveries. Trailer pallet configuration and loading specification can affect the temperature of the product inside the reefer, and subsequently, can affect temptale recorder readings. Trailer loading and pallet configuration becomes even more critical when the outside air temperature rises.

Centerline vs. Wall Loading
A trailer can be either centerline loaded, or wall loaded. Centerline loading prevents heat conduction between the trailer wall and the product as it creates a gap between the wall and the product where air can flow to remove heat that penetrates the wall.
Below, an example of a trailer that has been centerline loaded and the recorder reading this produces:


A trailer that is wall loaded will permit heat to be conducted through the walls and into the product.

Below is an example of a wall loaded trailer and the recorder reading this produces:

Produce loads should not be wall loaded, as this will affect pulp temperatures and recorder readings. To ensure success in deliveries, all produce loads should be centerline loaded.


Any thoughts or comments? Please feel free to share with us!!

Reference:
4 Steps to a Successful Shipment. Sensitech Cold Chain Visibility. PowerPoint Presentation. Received on 11/08/2009. Accessed for document on 01/06/2010.